For the heavy duty bender a set of
pins in various diameters is
available with the relevant support
bridges.
Type
Part no.
Straight cutter H28
2058.1000.0000
9- Size mandrel & sleeve set
As an extension of the Bendall
attachment accessories this set
produces larger diameter curves.
Together they span a diameter range
of 5 till 25 mm with 1,5 mm
increments.
Type
For rule
Part no.
9-Size mandrel & sleeve set
≤ 25,4
458.001.201
≤ 32
458.002.201
≤ 38
458.003.201
Set of female dies
These female dies are essential for
intricate work.
Type
Number
Part no.
Female die
22
458.002.122
Female die
23
458.002.123
Female die
24
458.002.124
Female die
25
458.002.125
Slot-bending dies
These special dies are required for
bending, the typical tapered side
bevel slots for rotary diecutting,
The male has a rigid rectangular
body in 5,6,8 and 10 mm wide.
Type
Size
Part no.
Slot-bending die M & F
5 mm
458.002.305
Slot-bending die M & F
6 mm
458.002.306
Slot-bending die M & F
8 mm
458.002.308
Slot-bending die M & F
10 mm
458.002.310
Standard dies for Helmold rule
benders
CHARACTERISTICS
All dies shown on this page are
common used for Rotary Rule Bending
and available in heights of 25.4 and
32 mm.
