RADIUS TOOTH: Cuts very well
across corrugation with little to no
visible crush. Difficult to pierce
inner liner with worn covers. Tight
bends may crack.
SCALLOPED TOOTH: Finished
product edge appearance is good. No
pulp build up in tooth valley.
Releases well from die. Tight bends
possible.
V- TOOTH: Best for inner
liner penetration. Symmetrical
design. Can collect pulp in valley.
STEEL RULE PROFILE
TOOTH SPACING: Distance between laterally
More teeth , More pressure
Less teeth , Less pressure
8,10,12,16,20 Teeth per inch
8 Tooth for “hard to penetrate”
20 Tooth for mini flute , medium
offers support resisting flat
crush. Better edge appearance.
Maintaining the condition of your anvil
surface for UNIFORM WEAR and
FIRMNESS is critical to rule profile
selection for any given board combination in
need of diecutting.
