PowerHandling H40S

H-Series was developed to handle higher torque applications and higher duty cycles than any other battery operated machine ever designed.

Direct Drive design houses the motor and planetary gearbox "inside" the drive roller.

All-Welded Chassis is a "box-style" design that encloses all airlines and connectors within the frame, protecting them from impact or debris. This seam welded construction is more expensive than using simple bolt-secured rods as cross-ties, but it provides substantially more structural integrity and strength. The frame is also point-load reinforced and hard chrome plated.

Heavy-Duty Handle-to-Base Coupling design is so strong, it is virtually indestructible from mechanical abuse. In fact since its introduction, we've not heard of a single in-field failure! This coupling design allows smooth rotation while eliminating the possibility of air leaks.

Large Diameter Rear Wheels are the key to their quick and easy manoeuvring. These 115mm (4½") diameter, solid steel, polyurethane surfaced wheels feature large double sealed ball bearings riding on 20mm (3/4") solid steel axles. The result is an extremely heavy-duty package that provides very smooth rolling and exceptional manoeuvrability.

H-Series use a high-torque, 4-brush, sealed motor suited to high loads but lower duty cycles. The H-Series also has temperature-controlled external fan cooling for longer run times, while all models use 3-stage, inline Planetary Gearboxes.

Intelligent Chargers can quick-charge 36V or 48V packs "offline" in 150 minutes, while simultaneously, the machine can continue to operate using the second battery pack.

Telescoping Handle Shaft allows the operator to instantly adjust handle height and handle orientation according to their own height and personal operating preference. Additionally, the 30mm (1 & 3/16") diameter steel tubing of the lower handle body greatly improves the handle shaft's strength, preventing it from bending under load.

High Traction Support Roller features a grooved herringbone profile for maximum traction, well suited to wet and high debris environments. The Fluro Orange, high quality, US-manufactured, polyurethane surface provides long wear life. The highest torque A40S and H40S models have an extended width for even greater traction. Additionally, the chassis is reinforced at the support roller axle shaft to better support the shaft under high load conditions.

Reversible, Variable Speed Throttle allows the operator to quickly change from forward running to reverse running. This is very helpful when a load is driven or lifted and becomes "stuck" or "wedged" under the load. Rather than having to gradually "wiggle" the machine out from the under the load, the motor can be switched into reverse and driven out, saving time and effort.